Call 08048960828 67% Response Rate

Send Email

MonoProof

Manufacturer of a wide range of products which include savespast cap, grouts & anchors - polyanchor s, acrylic primer - monobond ar, joint sealant - monoseal pp, floorclad sc and ancillary flooring - floorclad pu2k.
SavesPast CAP

SavesPast CAP

Get Latest Price

Product Details:
Model NumberMRC05
Packaging TypeBox
BrandSavesPast CAP
Packaging Size1 kg
coverage96.72 Sq.inch / kg / 5 mm
consumption0.0103 kg / Sq.inch / 5mm
Alumina based Silicon Carbide Putty against Impact Wear - Ceramic Alumina Putty


Additional Information:

  • Item Code: MRC-05
  • Production Capacity: 15 Tons Per Day
  • Delivery Time: 5 days
Get Best QuoteRequest A Callback
Grouts & Anchors - PolyAnchor S

Grouts & Anchors - PolyAnchor S

Get Latest Price

Product Details:
Minimum Order Quantity10000 Number
Usage/ApplicationConstruction
Packaging Size1 Pack
Typeconcrete,rock,brick and masonry
Item CodeGA11
Maximum Applicable ThicknessLess Than 24mm
Country of OriginMade in India
PolyAnchor S is a two part, fast setting, free flowing polyester resin anchoring grout, consisting of a specially formulated liquid resin and hardener. It is designed specifically for anchoring bolts and dowels in concrete, rock, brick and masonry. PolyAnchor S is used where the difference between the holediameter and bar diameter is < 24mm.PolyAnchor S is Always perform pull out testing to determine the performance in each situation. PolyAnchor S resists oil, grease, fats, mild acids, and alkalies, fresh and salt water.

Additional Information:

  • Delivery Time: Immediate
Get Best QuoteRequest A Callback
Acrylic Primer - MonoBond AR

Acrylic Primer - MonoBond AR

Get Latest Price

Product Details:
BrandMonoBond AR
Packaging Size5 kg
TypeAcrylic Primer
Coverage37 Sq.m / 5 kg / 100 mic / coat
Country of OriginMade in India
Consumption0.135 kg / Sq.m / 100 mic / coat
Acrylic Primer for Concrete Surfaces Acrylic Primer for Concrete Surfaces


Additional Information:

  • Item Code: AS01
  • Production Capacity: 15 tons per day
  • Delivery Time: 5 days
Get Best QuoteRequest A Callback
Joint Sealant -  Monoseal PP

Joint Sealant - Monoseal PP

Get Latest Price

Product Details:
BrandMonarch
Usage/ApplicationIndustrial
Packaging TypeTin
Country of OriginMade in India
size1 kg
coverage7 sq.m /1 kg / 0.1 mm Thick
consumption0.135 kg / Sq.m / 0.1 mm Thick

Wall care Putty

Walls may have slight surface irregularities and imperfections such as holes, dents and cracks. Apply a coat of good exterior-durable putty to cover the minor surface problem and to help smoother the wall surface. For larger dents and cracks use a mixture of cement and sand or a good quality crack filling product. Wall care Putty is recommended to even out the surface and give a more pleasing finish. This is a specially designed product based on white cement. It can be used for filling and levelling surface imperfections on rough cement plasters, thus providing a smooth and uniform finish for subsequent painting. Recommended for uneven surfaces.

Wall Care Putty Product Feature's:

· Monarch's Wall care Putty offers you total protection against flaking.

· Its superior quality makes it the only putty in India to meet global standards.

· As a white cement-based putty, it binds strongly with the base plaster, even if the surface is damp, and forms a protective base.

· It fills up the fine pores in the walls and ceiling, giving you a smooth and dry surface for painting on.

· With an effective protection against flaking, you are assured of a good looking home for years to come.

· Protection to Expensive Paints.

· Suitable for both internal and external walls.



Additional Information:

  • Item Code: RRS21
  • Production Capacity: 15 Tons Per Day
  • Delivery Time: 5 days
Get Best QuoteRequest A Callback
FloorClad SC

FloorClad SC

Get Latest Price

Product Details:
Coverage Area24 Sq.m / 20Kg / 150 mic
Packaging Size20 kg
BrandFloorClad SC
Country of OriginMade in India
coverage24 Sq.m / 20Kg / 150 mic
consumption0.833 Kgs/ Sq.m/ 150 mic
DescriptionEpoxy based Seal Coat to level the porous / imperfection / depressions / irregularities in epoxy mor
Monarch Epoxy Based Mortar for Lining is an epoxy resin based mortar for screeding, repair and improvement of concrete structures.In cured condition Floor Clad is a hard, tough with very high mechanical strength,high impact and abrasion resistance. It is resistant to most acids, alkalies, grease, fuels, minerals oil etc.

Application Areas:-
  • Epoxy screed flooring in industries for high mechanical wear & tear
  • Lining of storage tanks of chemicals which are corrosive in nature
  • Bedding mortar for A.R (acid resistance) tile lining etc
  • Patch repair / Pothole repair of all thickness.


Additional Information:

  • Item Code: FST05
  • Production Capacity: 15 Tons Per Day
  • Delivery Time: 5 kg
Get Best QuoteRequest A Callback
Ancillary Flooring - FloorClad PU2K

Ancillary Flooring - FloorClad PU2K

Get Latest Price

Product Details:
Minimum Order Quantity50000 Number
Packaging Size5 Kg
Coverage Area63 RMT / 5 Kg / 100 mic / 2 coats
Thickness100 Mic
StandardISI
Structurally InsulatedYes
Country of OriginMade in India
Ancillary Flooring - FloorClad PU2K is aTwo Component PU based Cold Applied durable Marking paint.

Additional Information:

  • Delivery Time: Immediate
Get Best QuoteRequest A Callback
FloorClad WEC3000 Epoxy Modified Cementitious Floor Screed

FloorClad WEC3000 Epoxy Modified Cementitious Floor Screed

Get Latest Price

Product Details:
BrandFloorClad WEC3000
Thickness3 mm to 5 mm
Country of OriginMade in India
size20 kg
coverage3.4 Sq.m / 20 kg / 3 mm
consumption5.88 / Sq.m / 3 mm
DescriptionEpoxy modified cementitious floor screed for Light & medium duty abrasion resistant @ 3mm - 5mm
Epoxy modified cementitious floor screed for Light & medium duty abrasion resistant @ 3mm - 5mm

FloorClad WEC 3000 is a hybrid polyurethane based, resin floor coating for use in wide range of industrial environments where a lasting to low maintenance floor is required. It is ideally suited for use in areas where a high degree of resistance to chemicals, oils and grease is required. The product comprises of two top coats each top coat to be a minimum of 200 microns thick.

Floor Screeds & Toppings Application

  • Workshops
  • Garages
  • Traffic aisles in factories or warehouses
  • Production floors
  • Processing Areas
  • Kitchens
  • Ware Houses
  • Corridors.
  • Showrooms.


Additional Information:

  • Item Code: FST-11
  • Production Capacity: 15 Tons Per Day
  • Delivery Time: 5 days
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "MonoProof"?
Thank youYour Enquiry has been sent successfully.
© Monarch Industrial Products India Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.