New Items

• MonoProof PWP two component, aliphatic, thixotropic, non-yellowing, non-chalking, pigmented polyurethane based elastomeric waterproof coating possessing good resistance to long term exposure of UV rays and provides an easily cleaned coating.
• The cured film shall be protected with concrete screed / mortar when used on accessible roofs to avoid damage from foot traffic.
• Coverage : 50 Sq.m / 10 kg / 100 mic / 2 coat
• Consumption: 0.2 Kg / Sq.Mtr / 100 Mic / 2 Coat
• Production Capacity : 15 Tons Per Day

• MonoProof PWP two component, aliphatic, thixotropic, non-yellowing, non-chalking, pigmented polyurethane based elastomeric waterproof coating possessing good resistance to long term exposure of UV rays and provides an easily cleaned coating.
• The cured film shall be protected with concrete screed / mortar when used on accessible roofs to avoid damage from foot traffic.
• Coverage : 50 Sq.m / 10 kg / 100 mic / 2 coat
• Consumption:  0.2 Kg / Sq.Mtr / 100 Mic / 2 Coat
• Production Capacity : 15 Tons Per Day

Description:

MonoProof BWP is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and chloride resistant that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. They also meet the requirements for coatings suitable for use on surfaces in contact with potable water.
MonoProof BWP are based on raw materials which are amongst the most water and water-vapor resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Also to protect the concrete against effects of chlorinated water, and to inhibit algae growth and facilitate easier cleaning. The excellent chemical resistance of MonoProof BWP makes it particularly suitable for sub-structure applications in areas where chemical contaminants and aggressive ground water conditions prevail.

Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose. MonoProof BWP incorporates fibers which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.

Application Area:

• Internal tanking of pools, water tanks, sumps, reservoirs, etc., before tiling or other surface finishing
• External tanking of masonry / concrete walls of basements, swimming pools, sumps and subways
• Waterproofing of terraces, balconies, kitchens and toilet floors
• R.C. Roofs
• Below grade floor slabs
• Car deck
• Podiums.
• Roof terraces, Balconies, Patios
• Sewage works and Sunken Portions

• MonoProof DG is used as internal coating for the waterproofing treatments of water tanks and building walls because it can be applied over damp surfaces, has excellent water resistance, adhesion, hardness & toughness and sets faster similar to solvent based epoxy formulations.
• It has an advantage of dilution with water for application over cementitious surfaces.
• Pack Size : 4 Kg
• Coverage in Sq.m : 18 Sq.m / 4 kg / Coat *
• Coverage In sq.ft: 194 Sq.ft / 4 kg / Coat *

• Waterproofing treatment for RCC water tanks.
• Internal damp wall treatments & also for ceiling.
• Toilet/ kitchen walls & lift pits.
• As putty with OPC-white cement to fill the fine cracks of internal walls.
• In sterile areas of pharms, food industries & hatcheries.

  Tweet

Product Features:

• The coatings keeps the surface dry even in heavy rain.

• The innovative Sola reflect technology reduces surface temperature by up to 5°C.

• This makes the interior cooler, thus helping to save energy.

CUSTOMER SCOPE OF ARRANGEMENT

1. Scaffolding Arrangement
2. Shelter for Material Security (with lock and key)
3. Accommodation for Technicians/ Applicators (Bachelor/Dormitory/Labor)
4. Food Arrangem

• Cement- concrete water storage tanks.
• Damp walls (Interior / Exterior)
• As a primer before painting (Interior/Exterior)
• Coating on walls of Breweries & Food processing industries.
• As a primer before application of coating in Food & Drug industries.
• Hatcheries & Aqua farms

Description:

MonoProof BWP is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and chloride resistant that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. They also meet the requirements for coatings suitable for use on surfaces in contact with potable water. 

MonoProof BWP are based on raw materials which are amongst the most water and water-vapor resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Also to protect the concrete against effects of chlorinated water, and to inhibit algae growth and facilitate easier cleaning. The excellent chemical resistance of MonoProof BWP makes it particularly suitable for sub-structure applications in areas where chemical contaminants and aggressive ground water conditions prevail.

Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose. MonoProof BWP incorporates fibers which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.

Application Area:

Internal tanking of pools, water tanks, sumps, reservoirs, etc., before tiling or other surface finishing

External tanking of masonry / concrete walls of basements, swimming pools, sumps and subways

Waterproofing of terraces, balconies, kitchens and toilet floors

R.C. Roofs

Below grade floor slabs

Car deck

Podiums.

Roof terraces, Balconies, Patios

Sewage works and Sunken Portions

MonoProof SSP, is a clear, breathable, solvent-based, siloxane/silane penetrating water-repellent sealer used to provide water repellent surface with improved self-cleaning properties on exterior building - brick work, concrete, cement rendering, natural or cast stone. Helps in reducing efflorescence due to soluble salts in brickwork.The coating is colorless and preserves natural color and texture of createdmaterial. It penetrates intoconcrete for aminimumdepth of penetration of5mmensuringhydrophobic zone.

Permeability is low to water, salt solution, dust and soot particles. Leaching of soluble salts from brick work, which causes efflorescence, absorption of deicing salts by concrete which causes degradation and absorption of atmospheric dirtby brickwork, concreteandstoneare all minimized.

• OzoProtect PW is a premium acrylic, base waterborne coating specifically designed for application on Concrete &
• asphalt pavements.
• It is developed with optimal balanced performance for a durable, long-lasting textured finish to asphalt/concrete pavement surfaces.
• It extends life of pavements by providing protection from the harmful effects of oxidation due to UV exposure and weathering. 
• Its key properties include wear and crack resistance, adhesion, minimal water absorption and increased friction properties coatings are environmentally safe.
• Coverage : 14 sq.m / 5 Kg/ 2 coats
• Consumption : 0.360 Kg / sq.m / 2 coats

• Thermo Coat - High Performance Heat Reflective Coating and energy efficency over Roofs/Terraces.
• Ozoprotect TC is a water-based, high solids, acrylic latex elastomeric coating reducing the heat loading into a buildings up to 40%.
• This highly reflective radiant barrier, heat reflecting roof coating paint is designed for maximum thermal efficiency, high reflectivity, ultra violet resistance and years of trouble free service.
• It is most versatile product for concrete roof / terrace applications foreffectiveheat reflection and insulation.
• Coverage : 56 sq.m / 20 kg / 200 mic / 2 coats
• Consumption : 0.36 Kg / sq.m / 200 mic / 2 coats

Product Features:

• Temperature: 15 to 20°C
• Energy cost saving for Air-Conditioned Building : Upto 40%
• Solar Reflective Index (SRI) Value : 112

• Aqua Guard - Single Component elastomeric coating for roofs and walls. 
• Available in wide range of colours
• (SRI) Value: 112 Tested by BEPL / NAL

Description

MonoProof AG is a ready to use, one component waterproofing membrane composed of  lastomeric polymers and proprietary chemicals. It can be used as a waterproof membrane & protective coatings for terraces, balconies, exterior walls and roof slabs. It accommodates limited crack movement in underlying surfaces. It develops an excellent bond to most building material hence becoming a part of concrete repair. MonoProof AG is trowel, brush, or roller applied to provide a continuous non-permeable waterproofing membrane to a variety of surfaces including concrete, masonry, laminates and cement backer boards.

Product Features

• Higher film thickness provides resistance to the movements of structures, gives crack bridging ability & waterproofing properties.
• Flexible and covers hairline cracks (up to 0.5 mm) effectively so that no ingress of water.
• Tough films withstands wind driven rain.
• High elasticity easily withstands stress caused by thermal expansion & contraction (>120% elongation at 150 micron DFT).
• No dilution is required hence ensures desired film thickness built-up without affecting the performance
• Resistance to fungus and algae hence maintains the aesthetic value.
• Resistance to UV (Sun light) hence coating has longer life.
• Very low dirt pick up & can be cleaned easily hence maintains the aesthetics.
• Permeable to water vapor.
• User friendly, easily applicable by brush, roller or spray.
• Toxicity - It is Non-toxic.

Typical Applications

• Water proofing of basements, toilet, terraces, roofs, swimming pools, water tanks, bridge decks, etc.
• Suitable for general concrete repairs.
• It gives excellent bond strength
• It can be used for protection of concrete against corrosion, salt attack, etc
• Waterproofing commercial and residential kitchens
• Waterproofing bathrooms and wet work areas in schools, hospitals, hotels, and office buildings and other commercial buildings.
• Waterproofing outdoor porches, balconies, and decks
• Setting adhesive for areas subject to excessive vibration and movement
• Crack isolation membrane over cracks where movement does not exceed 1/8 inch

• OzoProtect PA is an paint additive used to mix in house paint, which acts as a heat and radiant barrier and is most effective when used on both the inside and the outside of the structure.
• It is made up of a unique blend of specialty additives designed to reduce heat absorption and heat loss in your home.
• It is proven to ensure that your energy consumption will dramatically decrease by at least 20 percent.
• The energy cost savings you'll get from OzoProtect PA more than pays you back for the cost of the product.
• In fact, it is very common to see that within a couple of years your energy savings have paid you back for the total cost of painting your home.
• OzoProtect PA mixes equally well in any type of paint so simply use whatever paint you like.
• For best results, apply 2 coats of paint with OzoProtect PA.
• It is such an excellent insulating barrier, anything more than 2 coats only gives a marginal increase in performance.
• OzoProtectPA has the appearance of a very!ne white powder and will not affect the color of white or light colored paint.
• If added to dark colored paint such as navy blue or dark brown for example then a color shift of oneshade lighter can be expected.
• OzoProtect PA is not visible when added to house paint however on very smooth surfaces you can sometimes feel a slight texture which is normally no different than what you feel in the texture that a paint roller makes when used on the walls of your home.
• Coverage : 500 Gms / 10 ltr Paint
• Consumption : 500 Gms / 10 ltr Paint

Product Features:

• Reduce heating and cooling
• Superior radiant barrier
• Mixes with any paint
• No lead pigments
• Safe / Non-Toxic
• Improve comfort
• Energy efficient
• Dampen sound
• Compatible to any paint latex emulsion or oil based

• Micro-fibres reinforced Acrylic Water Proofing & Heat Reflective coatings to 200% elongation
• MonoProof Conc is a unique chemical treatment for the waterproof ing, protection and repair of concrete. MonoProof Conc is the most chemically active product within the MonoProof Crystalline Waterproofing System.

• 1st layer in grey color
• 2nd layer in ivory color
• 3rd layer in white color

• Minimum surface preparation needed - Low labor costs.
• Applied directly to the damp concrete and masonry
• Excellent adhesion - Bonds to porous and nonporous surfaces.
• Retains flexible when submerged
• Non-toxic-ideal for potable water tanks
• Breathable-allows transmission of water vapour from interior of building
• Flexible, with thermal expansion similar to concrete.
• For special applications such as areas where more thick plaster application is needed
• Excellent for concrete roof, leaking brick and masonry walls
• Good resistance to Carbon dioxide and Chloride ion diffusion
• Flexible enough to bridge hairline crack bridge up to 0.5mm width
• The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition
• Water vapor permeable
• Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
• Ease of application – can be applied by brush & roller easily.
• Light weight – does not add extra weight

• Basement
• water tanks
• reservoirs
• swimming pools
• Flat roofs
• terraces and balconies
• Bridge As
• Lift Pits
• Concrete foundations
• Parking decks
• Bathrooms, Toilets, Sunken Portions
• Podiums
• Roof Gardens
• Retaining walls
• Pile heads
• Submerged tunnels
• Sumps
• Structural surface of cellars
• Canals and dam walls
• Sea Water Channels
• Steam rooms
• Sewerage Treatment Plants
• Drainage culverts

Road Marking Paint

The increasing volume of traffic and population, proportionately increases the number of accidents. The perfect reflective road marking improves the road safety by enhancing the visibility of drivers, giving lesser strain and more comfort to the driver eyes.

The MonoMark cold applied retro reflective road marking coating is preferred over conventional thermo plastic paints for its excellent reflectivity, longevity, skid resistance, quick drying time, UV stability, environment friendly and easy execution.MonoMark meets the specifications laid by Most.

Application:
Highway road markings, Airport runway marking, Warehouse floor markings,Park way marking,Asphalt and concreate roads, Kerb Stones, Speed Humps, Car Park Structures, Intermediate Decks,Top/Exposed Decks, Ramps, center line, Edge Line, Zebra crossing

• Made of Solventless Epoxy resins and hardener
• Surface smooth, beautiful and surface mirror effect with Various Colors
• Products are manufactured under GMP standard

• It is made of Solventless Epoxy resins and hardener
• Surface smooth, beautiful and surface mirror effect
• It is good at acid proof, alkali proof, and salt proof
• It has compression-resistant, abrasion resistance and high cleanliness
• Higher abrasion resistance

• Protects Chemical spillage from Industrial Surfaces
• Pharma Industries
• Educational Institutions like colleges, schools
• Cement Manufacturing Units.

FloorClad SEMS is a hybrid polyurethane based, resin floor coating for use in wide range of industrial environments where a lasting to low maintenance floor is required. It is ideally suited for use in areas where a high degree of resistance to chemicals, oils and grease is required. The product comprises of two top coats each top coat to be a minimum of 200 microns thick.

Floor Screeds & Toppings Application

• Workshops
• Garages
• Traffic aisles in factories or warehouses
• Production floors
• Processing Areas
• Kitchens
• Ware Houses
• Corridors.
• Showrooms.

Building Floor Coatings

• MonoProof AEW is a three-layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing system.
• MonoProof AEW is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion.
• Pack Size : 20 Kg
• Coverage in Sq.m : 12.5 sq.mtr / 20 kg / 1 mm / 2 coats *
• Coverage In sq.ft: 134 sq.mtr / 20 kg / 1 mm / 2 coats *

• Easy to use : Simple brush or trowel application
• Cold applied :No heating or dangerous handling
• Liquid membranes: Can be applied to rough or contoured surfaces.
• No joints :Continuous unbroken film
• Nontoxic: Safe with drinking water.
• Thermal stability Irreversible chemical cure eliminates melting and flow at high temperature.
• Crack bridging - Bridges crack up to 2 mm wide.
• High chemical resistance – Excellent protection against corrosive soil conditions, resistance against saline water, mild acids and alkalis, high suphate resistance
• Durability - Excellent resistance to oxidation and does not harden over the period.
• Resistant to bio-deterioration
• Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
• Ease of application – can be applied by brush & roller easily.
• Light weight – does not add extra weight over the roof

• Basement
• water tanks
• reservoirs
• swimming pools
• Flat roofs
• terraces and balconies
• Bridges
• Lift Pits
• Concrete foundations
• Parking decks
• Bathrooms, Toilets, Sunken Portions
• Podiums
• Roof Gardens
• Retaining walls
• Pile heads
• Submerged tunnels
• Sumps
• Structural surface of cellars
• Canals and dam walls
• Sea Water Channels
• Steam rooms
• Sewerage Treatment Plants
• Drainage culverts

• Electrical Cabins
• Kitchens
• False ceiling
• Stairwells
• Doors
• Lift / Equipment Rooms
• Structural Steel
• Concrete Columns
• Ship bulkheads
• Railway vestibules
• Aircraft
• Safe deposit vaults/lockers
• Safes/Document cabinets
• Studios
• Computer/Server rooms
• Telecom switching station.

Rubber Repair Putty

This high performance two-part urethane was developed to repair critical operating equipment faster, more reliably and with greater ease than before. Rubber Repair Putty is an adhesive, sealant and repair compound all in one convenient, self-mixing system. Extremely tough and fast curing, it forms permanent bonds to rubber, urethane, PVC, metal, glass, masonry and plastics. Its excellent flexibility and elongation properties make it suitable as a sealant in the most demanding environments. And, the system's no-measure, self-mixing features make it extremely convenient for fast, on-site repairs, especially to conveyor belts and other rubber parts exposed to weather and extreme wear.

Recommended Applications of Rubber Repair Putty:

• Repairing conveyor belts.
• Repairing or rebuilding rubber liners in mills, pumps, feeder bowls, hoppers, chutes, and fans.
• Repairing cast urethane screens and liners.
• Forming tough, flexible bonds to metal, rubber, and masonry parts

We are offering Epoxy Metal Repair Putty

*Epoxy Putty is used to reclaim worn out machinery and process equipments.
*This is multi-purpose putty which is specially formulated to offer high compressive strength and *Resistance from chemicals.
*These are recommended for the most critical repair and reclamation work such as bearing seat & housing, shaft, pump, pipe

elbow, oil cooler, heat exchanger, offline leakages, motor end covers and compressors.

Applications

- Pumps Casings & impellers
- Heat Exchangers/ Oil Coolers
- Compressors
- Valves
- Floating Roofs
- Machine Bed
- Conveyor Belt
- ID Fans
- Duct
- Furnace Tube

• Abrasion Resistance
• Corrosion
• Wear and Tear Resistance

• Pump casings
• Housings
• Impeller fins
• Seal sections
• Wear rings
• Plungers
• Pump shafts.

• Permanently repair most ID Fans, pipes/fittings or hose in minutes.
• Applies like tape, sets like steel
• Works on pipe of nearly any material, including copper, steel, plastic, cast iron, rubber
• Includes everything you need but water - No tools needed.
• Economic and easy to use kit used for repairing leaking pipes
• Ceramic Carbide Putty against fine particle abrasion - Ceramic Carbide Putty SavesPast CCP

AllPurpose Repair Putty is a two-part adhesive consisting of an epoxy resin putty and a hardener putty which are mixed by kneading. They react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. Monarchs All Purpose Repair Putty does not shrink and is resistant to most common solvents. It can bond to damp surfaces and cure under water. Monarchs All Purpose Repair Putty can be sanded, drilled and painted.

Recommended Application of All Purpose Repair Putty

• Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive parts, pools and cracks in concrete.
• Bonding metal, masonry, brick, wood, glass, ceramic, rubber, fiberglass composite, china, stone, marble and many rigid plastics

• Automotive
• Marine
• Heavy Duty
• Aluminum, steel, brass, bronze, castings and stampings

What is Cold Welding?

Cold or contact welding is a solid-state welding process in which joining takes place without fusion/ heating at the interface of the two parts to be welded. Unlike in the fusion-welding processes, no liquid or molten phase is present in the joint

• Transformer, Transmission and product pipelines, oil, and gas risers
• Girth welds on vessels and pipelines, elbows, tees, flangers
• Process piping handling chemicals , oil, gases, water etc
• Impact protection
• Emergency repaircracked, or corroded or pipes
• Force mains and gravity lines
• Under water repair and splash zone
• Joint and tee repair.

• Permanently repair most pipes / fittings or hose in minutes
• Applies like tape, sets like steel
• Works on pipe of nearly any material, including copper, steel, plastic, cast iron, rubber
• Includes everything you need but water - No tools needed.

• Backing of wear liners in all makes and models of cone & gyratory crushers facilitating extreme heavy duty crushing
• Safe and more economical than molten zinc
• Extreme heavy duty crushing
• Minimal amount of filler settlement.

MonGrout GP , precision grouting is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non???shrink grout for gap thicknesses up to 100mm. MonGrout GP is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Features:

The key feature are: Rehabilitation instead of replacement, Safety enhancement as no dangers of hot work, In-situ application - do jobs right on production line, fast and economical repairs, ease in application procedures, permanent solutions to countless applications, increased reliability, reduce the cost of plant shutdown, match metal color, excellent resistance to aggressive chemicals, high compressive strength for mechanical applications.

• Durable in all climatic conditions
• Antifungal- resistant to fungal attack
• Excellent adhesion : Bonds well with both steel and concrete substrates
• Excellent flexibility to withstand higher temperatures

• Chemical / Petrochemical plants.
• Refineries, Power stations.
• Nuclear facilities, Industrial facades
• Wood and paper industry, Food industry
• Sea Water Desalination, Fertilizer Factories
• Waste Incineration,
• Trace heating, Underground tank, Overhead tank.

• Durable in all climatic conditions
• Antifungal- resistant to fungal attack
• Excellent adhesion : Bonds well with both steel and concrete substrates
• Excellent flexibility to withstand higher temperatures

• Chemical / Petrochemical plants.
• Refineries, Power stations.
• Nuclear facilities, Industrial facades
• Wood and paper industry, Food industry
• Sea Water Desalination, Fertilizer Factories
• Waste Incineration,
• Trace heating, Underground tank, Overhead tank.

Description:

The product is a high build, two pack material providing excellent durability combined with excellent corrosion and fire protection for a long period of time for structures, pipe work, vessels and fire resistant divisions from the effects of hydrocarbon pool and jet fires caused due to petrol, diesel, petrochemicals and gases, cellulosic fire etc., primarily intended for use in high risk environments such as oil, gas, petrochemical and power generation industries. Suitable for both offshore and onshore environments. The coating thickness required for protection is normally specified in the range of 4-20 mm. To be used as mid coat as part of a complete system in atmospheric environments followed by weather resistant aliphatic polyurethane finish coat, MonoGuard PCG. The coating facilitates as sealer function to prevent early degradation and inactivation of intumescent layer. Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product.

FlameGuard EIC Meets the following specifications

Typical Applications:

• Backing of wear liners in all makes and models of cone & gyratory crushers facilitating extreme heavy duty crushing
• OEM supplier to all major Indian and Imported crushers
• Safe and more economical than molten zinc
• Extreme heavy duty crushing
• Minimal amount of filler settlement.

Product range:-