Call 08048960828 74% Response Rate

Send Email

Waterproofing Coatings

Signs of Water Leakage:-
  • Blistering / Bubbling of paints: Water droplets and Dampness
  • Fungal / Bacterial growth: Water leakage and Water marks
  • Spalling / Bulging of concrete: Salt deposit and Stain marks
  • Exposed rusty reinforcement steel


Applications:-

  • Basement retaining walls
  • Foundations
  • Tunnels
  • Roof Terrace
  • Swimming pools
  • Overhead tank
  • Under Ground Tank
  • Ground level reservoir
  • R.O Tank
  • Walls


Product Group:-

  • Latex Modified waterproofing system and support products
  • Crystallization based waterproofing system and support products
  • Water based food grade waterproofing system and support products
  • Silicon based water repellant Coatings
  • Polyurethane based waterproofing system and support products
  • Epoxy based waterproofing system and support products
  • Silicate Floor Hardeners
Monoproof-RG Rain Protective And Acrylic Anti-Carbonation Waterproofing  Paint Coatings 20 Kg
  • Monoproof-RG Rain Protective And Acrylic Anti-Carbonation Waterproofing  Paint Coatings 20 Kg
  • Monoproof-RG Rain Protective And Acrylic Anti-Carbonation Waterproofing  Paint Coatings 20 Kg

Monoproof-RG Rain Protective And Acrylic Anti-Carbonation Waterproofing Paint Coatings 20 Kg

Get Latest Price

Product Brochure

Product Details:
Packaging Size20 Kg
BrandMonoProof
ColorWhite
TypesAcrylic
Form of PaintLiquid
Coverage60 sq.mtr / 20 kg / 110 mic / 2 coats
Specific Gravity1.155
Viscosity Cp15
pH VALUE6.5
FUNCTIONAL CURE24
CURED HARDNESS70
TENSILE STRENGTH5.8
FLEXURAL STRENGTH12
COMPRESSIVE STRENGTH39
CHEMICAL RESISTANCEResists mild acids & alkalis
Consumption0.33 Kg / sq.mtr / 110 Mic / 2 Coats

Description:

MonoProof RG is composed of high quality acrylic emulsion polymer. It is used as a waterproo!ng & protective coating for exterior walls of the concrete & masonry buildings because it forms higher !lm thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and anexcellent resistance tothegrowthof microorganisms.

Product Features:

  • Available in a broad range of colors and textures for design versatility
  • Excellent hiding power
  • Effective carbon dioxide diffusion barrier, protects embedded steel from corrosion
  • Freeze/thaw resistant, suitable for cold climates
  • Resistance to UV (sun light) hence coating has longer life
  • High elasticity easily withstands stress caused by thermal expansion & contraction (>100%elongation at 110-120 micron Dft).
  • Breathability - permeable to water vapor
  • Toxicity - it is non-toxic.
  • Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
  • Ease of application – can be applied by brush & roller easily.
  • Light weight – does not add extra weight over the roof


Application Area:

  • All types of exterior masonry surfaces, concrete, cement sand renderings, etc.
  • Applicable on asbestos sheets. rain lashing walls, chajjas and parapet walls
  • Vertical & Overhead surfaces Above-grade
  • Flashings
  • Sealing joints, laps and roofing screws on corrugated roofs
  • Parapet walls


Additional Information:

  • Item Code: MonoProof-RG-11108
  • Production Capacity: 15 Tons Per Day
Get Best QuoteRequest A Callback
MonoProof- Roofguard  (Acrylic polymer modified elastomeric waterproofing)
  • MonoProof- Roofguard  (Acrylic polymer modified elastomeric waterproofing)
  • MonoProof- Roofguard  (Acrylic polymer modified elastomeric waterproofing)
  • MonoProof- Roofguard  (Acrylic polymer modified elastomeric waterproofing)

MonoProof- Roofguard (Acrylic polymer modified elastomeric waterproofing)

Product Price: Rs 100 / KgGet Best Price

Minimum Order Quantity: 100 Kg

Product Brochure

Product Details:
Form Of PaintPowder
Mix Ratio1(R):2(A)
Packaging Size20 Kgs
BrandMonarch
FormLiquid, Powder
ColorGrey
Country of OriginMade in India
Tensile Strength4 N/mm2
Chemical ResistanceYes
Usage/ApplicationRoofs, Concrete
Shelf Life2 years
Specific Gravity1.65
Coverage12.5 sq.mtr / 20 kg / 1 mm / 2 coats,12.5 sq.mtr / 20 kg / 1 mm / 2 coats
Compressive Strength46 N/mm2
Available ColourGrey
pH Value7
TypesAcrylic
Packaging TypeBucket
Paint Base TypeWater Based
Consumption1.6 kg / sq.mtr / 1 mm / 2 Coats
  • MonoProof - Roofguard  is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion.
  • The coating additionally protects    against concrete decay providing a long lasting barrier to waterborne corrosive salts, freeze-thaw scaling, chloride, carbonation and atmospheric gases. A 1mm coating provides anti carbonation cover equivalent to over 80cm of concrete or air layer thickness for carbon dioxide diffusion (R) of 92 metres.  
  • Pack Size : 20 Kg
  • Coverage in Sq.m : 12.5 sq.mtr / 20 kg / 1 mm / 2 coats *
  • Coverage In sq.ft: 134 sq.mtr / 20 kg / 1 mm / 2 coats *

Description:

MonoProof LWP is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and durable water tight coating which cannot be easily damaged or worn away. The coating is designed to re-face and even out variations in concrete and masonry surfaces. This is an easily brush able coating which can be simply applied by a stiff brush, or trowel to obtain the desired thickness. The polymer provides with exceptional adhesion, toughness and durability. MonoProof LWP effectively seals concrete masonry walls and bridges the shrinkage cracks which are static. The coating additionally protects against concrete decay providing a long lasting barrier to waterborne corrosive salts, freeze-thaw scaling, chloride, carbonation and atmospheric gases. A 1mm coating provides anti carbonation cover equivalent to over 80cm of concrete or air layer thickness for carbon dioxide diffusion (R) of 92 meters. MonoProof LWP is shown to resist positive hydrostatic pressure up to 7 meter head.

Product Features:
  • Easy to use : Simple brush or trowel application
  • Cold applied :No heating or dangerous handling
  • Liquid membranes: Can be applied to rough or contoured surfaces.
  • No joints :Continuous unbroken film
  • Nontoxic: Safe with drinking water.
  • Thermal stability Irreversible chemical cure eliminates melting and flow at high temperature.
  • Crack bridging - Bridges crack up to 2 mm wide.
  • High chemical resistance – Excellent protection against corrosive soil conditions, resistance against saline water, mild acids and alkalis, high suphate resistance
  • Durability - Excellent resistance to oxidation and does not harden over the period.
  • Resistant to bio-deterioration
  • Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
  • Ease of application – can be applied by brush & roller easily.
  • Light weight – does not add extra weight over the roof

Application Area:

  • Basement
  • water tanks
  • reservoirs
  • swimming pools
  • Flat roofs
  • terraces and balconies
  • Bridges
  • Lift Pits
  • Concrete foundations
  • Parking decks
  • Bathrooms, Toilets, Sunken Portions
  • Podiums
  • Roof Gardens
  • Retaining walls
  • Pile heads
  • Submerged tunnels
  • Sumps
  • Structural surface of cellars
  • Canals and dam walls
  • Sea Water Channels
  • Steam rooms
  • Sewerage Treatment Plants
  • Drainage culverts


    Additional Information:

    • Production Capacity: 15 Tons Per Day
    • Delivery Time: Within 7 days
    • Packaging Details: 20 Kgs
    Get Best QuoteRequest A Callback
    Monoproof Damp Guard - (Damp Proof Coating,over interior walls)
    • Monoproof Damp Guard - (Damp Proof Coating,over interior walls)
    • Monoproof Damp Guard - (Damp Proof Coating,over interior walls)

    Monoproof Damp Guard - (Damp Proof Coating,over interior walls)

    Product Price: Rs 564 / KgGet Best Price

    Minimum Order Quantity: 5 Kg

    Product Brochure

    Product Details:
    ColorBlue
    Available ColourBlue
    BrandMonarch
    TypeEpoxy
    Packaging Size5 Kg
    Production Capacity15 Tons Per Day
    Consumption0.22 Kg / Sq.Mtr / 200 mic / 2 Coats
    Coverage22.5 Sq.m / 5 kg / 200 mic / 2 coat
    FUNCTIONAL CURE8 Hr
    MIX RATIO1(R)1(H)1 (Water)
    POT LIFE60 minutes
    Product NameMonoProof Damp Guard
    SPECIFIC GRAVITY1.18
    • MonoProof DG is used as internal coating for the waterproofing treatments of water tanks and building walls because it can be applied over damp surfaces, has excellent water resistance, adhesion, hardness & toughness and sets faster similar to solvent based epoxy formulations.
    • It has an advantage of dilution with water for application over cementitious surfaces.
    • Pack Size : 5Kg
    • Coverage in Sq.m : 18 Sq.m / 4 kg / Coat *
    • Coverage In sq.ft: 194 Sq.ft / 4 kg / Coat *

    Application Area:
    • Waterproofing treatment for RCC water tanks.
    • Internal damp wall treatments & also for ceiling.
    • Toilet/ kitchen walls & lift pits.
    • As putty with OPC-white cement to fill the fine cracks of internal walls.
    • In sterile areas of pharms, food industries & hatcheries.


    Additional Information:

    • Production Capacity: 15 tons per day
    • Delivery Time: Within 7 Days
    • Packaging Details: 5Kgs
    Get Best QuoteRequest A Callback
    MonoProof FG - (Food Grade Lining a Waterproofing Coatings )
    • MonoProof FG - (Food Grade Lining a Waterproofing Coatings )
    • MonoProof FG - (Food Grade Lining a Waterproofing Coatings )

    MonoProof FG - (Food Grade Lining a Waterproofing Coatings )

    Product Price: Rs 597 / KgGet Best Price

    Product Brochure

    Product Details:
    Pack Size5 Kg
    FormLiquid
    Specific Gravity1.65
    Tensile Strength1.4
    pH Value6.5
    Compressive Strength35
    Chemical ResistanceYes
    BrandMonarch
    ColorBlue
    Production Capacity15 Tons Per Day
    Consumption0.5 Kg / Sq.Mtr / 400 mic / 2 Coats
    Coverage10 Sq.m / 5 kg / 400 mic / 2 coat
    FLEXURAL STRENGTH12
    Product NameMonoProof FWP
    • MonoProof Food Grade is 2 pack, solvent free epoxy material used for lining and Water proofing portal water retaining structures and surfaces subject to contact with food stuffs.   The material cures to provide a smooth, hygienic and tough finish which is suitable for contact with potable water and foodstuffs. The cured film is resistant to corrosion, chemical attack and abrasion.    The cured film is non-toxic and meets the requirements of IS: 9833 - 1981. The coating is designed to be applied in two coats to achieve a minimum total dry film thickness of   400 microns 
      .
    • The material cures to provide a smooth, hygienic and tough finish which is suitable for contact with potable water and food stuffs.
    • Pack Size : 5 Kg
    • Coverage in Sq.m : 10 Sq.m / 5 kg / Coat *
    • Coverage In sq.ft: 108 Sq.ft / 5 kg / Coat *

    Application Area:
    • Reservoirs
    • Tanks
    • Silos water
    • Treatment Works
    • Breweries
    • Dairies
    • Meat and food processing plants
    • Interior and exterior areas for vertical and horizontal applications.
    • Metal or concrete tanks.
    • Walls as gas and vapor barrier coating resistant to chemical materials.
    • Oil and fuel tanks.
    • Industries Covered
    • Power stations, sugar factories, hangars, and liquid storage areas In drinking water depots.
    • Petroleum refineries and paper factories
    • Beer, wine and raisin industry
    • Soft drink and fruit juice industry.
    • Milk, cheese, and yogurt industry.
    • Tomato paste and canned food industry
    • Medicine, paint, paper, battery and fertilizer industry
    • Printing houses, kitchens and laundries of hotels
    • Laboratories of hospitals, mess halls, wet volumes, and hygienic environments.


    Additional Information:

    • Item Code: 11131
    Get Best QuoteRequest A Callback
    MonoProof Krystal

    MonoProof Krystal

    Product Price: Rs 200 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Available ColourGrey
    Model Name/NumberMonoProof Krystal
    Location TypeIndustrial
    Site LocationAll Over India
    Service ChargesApplicable
    Material ProcurementSupplier End
    Packaging Size25 Kgs
    BrandMonarch
    Coverage17.5. Sq.m/ 25 kg /1mm /2 coat
    MonoProof Krystal is composed of high-quality cement, properly selected & gradedinert aggregates, proprietary waterproofingactive chemicals & additives. It is used as achemically active waterproofing treatment for concrete.  when mixed with water and applied as a brush coat to concrete,it penetrates deeply into the capillaries of theconcrete to form billions of needles like crystals fill the porand minor shrinkage cracks in the concrete toprevent any further water ingress (even underpressure). However, it will still allowthe passage of vapor through the structure (i.e. theconcrete will be able to “breathe”). Even after the concrete has cured, it remainsdormant in the concrete and will reactivate in thepresence of moisture to seal capillary tracts andhairline cracks.In addition to waterproofing the structure, It protects concrete against seawater,wastewater, aggressive groundwater andmany other aggressive chemical solutions. MonoProof Krystal   is approved for use in contact withpotable water and is therefore suitable for use inwater storage.

    Additional Information:

    • Item Code: CW05
    • Production Capacity: 15 Ton Per Day
    • Delivery Time: Within 7 days
    • Packaging Details: 25 Kgs
    Get Best QuoteRequest A Callback
    MonoProof Rapid (Seals Running / Active water leakages in concrete surfaces )

    MonoProof Rapid (Seals Running / Active water leakages in concrete surfaces )

    Product Price: Rs 100 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Leakage SizeMedium
    Usage/ApplicationCrystalline Rapid for plugging of active leakages
    Building TypeIndustrial
    Coverage3/4" *3/4" dia/5 Kgs
    Coating TypeWaterproof Coating
    Site LocationAll Over India
    Leakage AreaOn Ground
    Type Of ConstructionIndustrial
    Build Up Area / Size3/4" *3/4" dia/5 Kgs
    MonoProof  Rapid is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking

    Additional Information:

    • Production Capacity: 15 Tons Per Day
    • Delivery Time: Within 7 Days
    • Packaging Details: 25 Kgs
    Get Best QuoteRequest A Callback
    MonoProof  - Aqua Guard (Single Component Elastomeric Coating For Roofs And Walls)

    MonoProof - Aqua Guard (Single Component Elastomeric Coating For Roofs And Walls)

    Product Price: Rs 230 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Average Coverage30 Sq.m / 10 kg / 110 mic / 2 coats
    Available ColourAll Colors
    Packaging TypeBucket
    ColorAll Colors
    BrandMonoProof AG
    Coverage30 Sq.m / 10 kg / 110 mic / 2 coats,30 Sq.m / 10 kg / 110 mic / 2 coats
    Packaging Size10 kg
    Country of OriginMade in India
    Paint Base TypeWater Based
    UsageApplicable on asbestos sheets. rain lashing walls, chajjas and parapet walls
    Form Of PaintLiquid
    Shelf Life2 years
    FeaturesHigher film thickness provides resistance to the movements of structures, gives crack bridging abili
    consumption0.33 Kg / Sq.Mtr/110 Mic / 2 Coats
    MonoProof  - Aqua Guard is a ready to use, one component waterproofing membrane composed of elastomeric polymers and proprietary chemicals. It can be used as a waterproof membrane & protective coatings for terraces, balconies, exterior walls and roof slabs. It accommodates limited crack movement in underlying surfaces. It develops an excellent bond to most building material hence becoming a part of concrete repair. MonoProof AG is trowel, brush, or roller applied to provide a continuous non-permeable waterproofing membrane to a variety of surfaces including concrete, masonry, laminates and cement backer boards. 

    Additional Information:

    • Production Capacity: 15 Tons Per Day
    • Delivery Time: Within 7 Days
    • Packaging Details: 10Kgs
    Get Best QuoteRequest A Callback
    MonoProof Elastoseal - (3 coat waterproofing & heat reflection system)

    MonoProof Elastoseal - (3 coat waterproofing & heat reflection system)

    Product Price: Rs 250 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    FormLiquid
    UsageFlat roofs
    BrandMonarch
    Coverage32 Sq.m/20kg/330mic/ 3coats
    Country of OriginMade in India
    Packaging TypeBucket
    ColorWhite
    Available ColourWhite
    Coverage32 Sq.m/20kg/330mic/ 3coats
    Packaging Size20 Kgs
    Paint Base TypeWater Based
    FeaturesExcellent for concrete roof, leaking brick and masonry walls
    Shelf Life2 years
    Usage/ApplicationConcrete
    Size20 KGS
    Form Of PaintLiquid
    TypeAcrylic
    MonoProof Elastoseal - (3 coat waterproofing & heat reflection system) is a single Component 3 layer heavy duty terrace waterproof & heat reflective coating system, The Coating material specially developed highly elastic & resilient acrylic polymers, micro-fibers, additives & best quality fungicidal in water medium etc. MonoProof EW200 is used as a liquid applied waterproofing & heat reflective membrane for all types of building terraces. The 3 layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing & heat reflective coating system. The 3rd and final layer whitish coating containing low density, hollow ceramic microspheres reflects 98% of heat back to atmosphere still acting as elastomeric permanent waterproofing membrane.

    Additional Information:

    • Production Capacity: 15 Tons Per Day
    • Delivery Time: Within 7 Days
    • Packaging Details: 20Kgs
    Get Best QuoteRequest A Callback
    MonoProof Rain Guard (Rain Protective Acrylic Coating)

    MonoProof Rain Guard (Rain Protective Acrylic Coating)

    Product Price: Rs 250 / KGGet Best Price

    Minimum Order Quantity: 100 KG

    Product Brochure

    Product Details:
    Country of OriginMade in India
    Packaging Size10 kg
    UsageAll types of exterior masonry surfaces, concrete, cement sand renderings, etc.
    Packaging TypeBucket
    Coverage30 Sq.m / 10 kg / 110 mic / 2 coats
    Available ColourAll Colors
    ColorAll Colors
    Form Of PaintLiquid
    Paint Base TypeWater Based
    Coverage30 Sq.m / 10 kg / 110 mic / 2 coats
    Shelf Life2 years
    FeaturesBreathable to allow water vapor to escape UV resistance provides excellent color retention
    BrandMonoProof Rain Guard
    consumption0.33 Kg / Sq.Mtr/110 Mic / 2 Coats
    MonoProof RainGuard is composed of high quality acrylic emulsion polymer.  It is used as a waterproofing & protective coating for exterior walls of the concrete & masonry buildings because it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms.  

    Additional Information:

    • Production Capacity: 15 Tons Per Day
    • Delivery Time: Within 7 Days
    • Packaging Details: 10 Kgs
    Get Best QuoteRequest A Callback
    Monoproof-AG Aqua Guard - Single Component Elastomeric Coating for Roofs and Walls 20 Kg

    Monoproof-AG Aqua Guard - Single Component Elastomeric Coating for Roofs and Walls 20 Kg

    Get Latest Price

    Product Brochure

    Product Details:
    Packaging Size20 Kg
    Coverage60 Sq.m / 20 kg / 110 mic / 2 coats
    BrandMonoproof
    ColorBrick Color and Available in wide range of colors
    FormLiquid
    BaseWater Base Acrylic Emulsion
    Density1.25
    Drying time5-6
    ElongationAbove 120
    Adhesion StrengthAbove 1.5
    Tensile StrengthAbove 2.5
    Water Permeability5
    Consumption0.33 Kg / Sq.Mtr/110 Mic / 2 Coats
    • Aqua Guard - Single Component elastomeric coating for roofs and walls. 
    • Available in wide range of colours
    • (SRI) Value: 112 Tested by BEPL / NAL

    Description

    MonoProof AG is a ready to use, one component waterproofing membrane composed of  lastomeric polymers and proprietary chemicals. It can be used as a waterproof membrane & protective coatings for terraces, balconies, exterior walls and roof slabs. It accommodates limited crack movement in underlying surfaces. It develops an excellent bond to most building material hence becoming a part of concrete repair. MonoProof AG is trowel, brush, or roller applied to provide a continuous non-permeable waterproofing membrane to a variety of surfaces including concrete, masonry, laminates and cement backer boards.


    Product Features

    • Higher film thickness provides resistance to the movements of structures, gives crack bridging ability & waterproofing properties.
    • Flexible and covers hairline cracks (up to 0.5 mm) effectively so that no ingress of water.
    • Tough films withstands wind driven rain.
    • High elasticity easily withstands stress caused by thermal expansion & contraction (>120% elongation at 150 micron DFT).
    • No dilution is required hence ensures desired film thickness built-up without affecting the performance
    • Resistance to fungus and algae hence maintains the aesthetic value.
    • Resistance to UV (Sun light) hence coating has longer life.
    • Very low dirt pick up & can be cleaned easily hence maintains the aesthetics.
    • Permeable to water vapor.
    • User friendly, easily applicable by brush, roller or spray.
    • Toxicity - It is Non-toxic.


    Typical Applications

    • Water proofing of basements, toilet, terraces, roofs, swimming pools, water tanks, bridge decks, etc.
    • Suitable for general concrete repairs.
    • It gives excellent bond strength
    • It can be used for protection of concrete against corrosion, salt attack, etc
    • Waterproofing commercial and residential kitchens
    • Waterproofing bathrooms and wet work areas in schools, hospitals, hotels, and office buildings and other commercial buildings.
    • Waterproofing outdoor porches, balconies, and decks
    • Setting adhesive for areas subject to excessive vibration and movement
    • Crack isolation membrane over cracks where movement does not exceed 1/8 inch

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     



    Additional Information:

    • Item Code: Monoproof-AG-11102
    Get Best QuoteRequest A Callback
    MonoProof Water Repellent - (Siloxane based Hydrophobic Impregnate Moisture Proof Coating)

    MonoProof Water Repellent - (Siloxane based Hydrophobic Impregnate Moisture Proof Coating)

    Product Price: Rs 170 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Coverage13.25 Sq.m / 5 kg / 3 coats
    Specific Gravity0.85 Gm/cc
    Application MethodRoller
    pH Value7 to 8
    Usage/ApplicationConcrete
    Coats Required3
    FormLiquid
    ColorClear
    Country of OriginMade in India
    Drying Time2 Hrs
    Paint Base TypeWater Based
    Recoating Time1 Hr
    Packaging Size5 kg
    Packaging TypeBucket
    FinishHigh Gloss
    BrandMonarch
    Production Capacity15 Tons Per Day
    BaseSilane Siloxane
    Dilutable Ration110 to 115
    Consumption0.38 Kg / Sq.Mtr / 3 Coat
    Monoproof WSP ( concentrate) is a water repellent state-of-art formulation, based on Silane / Siloxanes. It
    yields a stable emulsion. This emulsion produces a hydrophobic treatment that inhibits water absorption even on
    alkaline surfaces without significantly reducing water vapour permeability. Monoproof WSP provides water repellence
    within 24 hours of application. The water repellence further improves over a week after application. Can be used diluted
    or as supplied in the formulation of water repellent products. To prevent fungal growth within the package, additional
    preservative may be required. The product provides a long lasting effect as it penetrates the substrate being treated.



    Additional Information:

    • Production Capacity: 15 tons per day
    • Delivery Time: Within 7 Days
    • Packaging Details: 5 Kg
    Get Best QuoteRequest A Callback
    MonoProof LW ( Integral Waterproofing Liquid Admixture)

    MonoProof LW ( Integral Waterproofing Liquid Admixture)

    Product Price: Rs 130 / LitreGet Best Price

    Minimum Order Quantity: 50 Litre

    Product Brochure

    Product Details:
    Type Of ConstructionResidential, Commercial, Industrial
    Brand of Product UsedMonarch
    Usage/ApplicationIndustrial
    Packaging Size1 Ltr
    Coverage Area200 ml /50 Kg cement
    size1 Ltr
    coverage200 ml /50 Kg cement
    consumption200 ml /50 Kg cement
    DescriptionIntegral Waterproofing Liquid Admixture


    MonoProof LW is applied to minimize permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications. In addition to waterproofing the structure, MonoProof LW protects concrete against seawater, wastewater, aggressive ground water and many other aggressive chemical solutions.  MonoProof LW is approved for use in contact with potable water, and is therefore suitable for use in water storage tanks, reservoirs, water treatment plants, roof slabs and screeds, basements, external plastering, bathroom floors, sumps, drains etc.

    Features:

    • Increases durability, by increase in impermeability
    • Does not affect the setting time and strength
    • Ready to use liquid, hence dispersion is better.


    Additional Information:

    • Production Capacity: 15 Tons Per Day
    • Delivery Time: Within 7 days
    • Packaging Details: 1 Ltr
    Get Best QuoteRequest A Callback
    MonoProof PW  (Integral Waterproofing Powder Admixture)

    MonoProof PW (Integral Waterproofing Powder Admixture)

    Product Price: Rs 50 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Type Of AdmixturePc Based Admixture
    Grade StandardIndustrial Grade
    Country of OriginMade in India
    ColorGrey
    Packaging Size1 kg
    Packaging TypePouch
    BrandMonarch
    Usage/ApplicationIndustrial
    TypePowder
    Model NumberIS:2645-2003.
    Coverage1 Kg / 50 Kg cement
    Consumption1 Kg / 50 Kg cement
    MonoProof PW   is applied to minimize permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications. In addition to waterproofing the structure, MonoProof PW protects concrete against seawater, wastewater, aggressive ground water and many other aggressive chemical solutions. MonoProof PW is approved for use in contact with potable water, and is therefore suitable for use in water storage tanks, reservoirs, water treatment plants, roof slabs and screeds, basements, external plastering, bathroom floors, sumps, drains etc. 

    Construction Chemicals has following applications:
    Hydel Project
    Civil construction
    Bridges
    Surface Hardening
    Irrigation
    Port.


    Additional Information:

    • Production Capacity: 15 Tons Per Day
    • Delivery Time: Within 7 days
    • Packaging Details: 1 Kg
    Get Best QuoteRequest A Callback
    Extreme Temperature Coating

    Extreme Temperature Coating

    Get Latest Price

    Product Details:
    Packaging Size4 ltr
    BrandThermoKote SE 610BLA
    ColorBlack
    Is It ISO CertifiedISO Certified
    Country of OriginMade in India
    Coverage15 Sq.m / 4 ltr / 60 mic / 2 coats
    Consumption0.267 ltr / Sq.m / 60 mic / 2 coats
    DescriptionSilicone Epoxy Modified Heat resistance Coating till 600 DegreeC (Black)
    Extreme Temperature Coating

    Our Extreme Temperature Coatings can be applied directly to hot steel at 500°F (260°C), a single component product that can prevent corrosion under insulation, topcoats available in almost any color and stability to 1000°F (538°C), high build systems, products that require no complex post-cure, a material you can apply directly to rust, and OEM coatings among others.

    We are here to be a platform of knowledge and welcome all inquiries regarding heat resistant coatings. We are dedicated towards one goal—solving problems associated with high temperature coating.

    Applications:-
    • Chimney
    • Under Insulation Installations
    • Oven
    • DG Set
    • Exhaust Stack.


    Additional Information:

    • Item Code: HTC08
    • Production Capacity: 15 tons per day
    • Delivery Time: 5 days
    Get Best QuoteRequest A Callback
    ThermoKote SE410POR Chimney Paint

    ThermoKote SE410POR Chimney Paint

    Get Latest Price

    Product Details:
    ColorRED
    Is It ISO CertifiedISO Certified
    Country of OriginMade in India
    consumption0.200 ltr / Sq.m / 50 mic / 2 coats
    size4 ltr
    coverage20 Sq.m / 4 ltr / 50 mic / 2 coats
    DescriptionSilicone Epoxy Modified Heat resistance Coating 400 DegreeC (PO Red)
    Chimney Paint
    • Single component Metal Chimney Coatings that does not crack or peel off at high temperature
    • Metal Chimney Coatings Available in 5 ranges for service conditions till 210°C, 410°C, 610°C, 810°C & 1000°C
    • Corrosion Protection Coatings Good stability to color and severe thermal cycling when temperature fluctuate from ambient and high temperature.
    • Specially developed coating formulation for sulfur resistance available.

    Salient Features of Chimney Paint :
    • Good resistance to extremes of weather, saline environment and boiling water
    • Wide Industrial applications in Refineries, Cement Plants, Pulp and Paper Plants, Power Plants, Chemical Plants , Offshore rigs, OEM applications, Marine & Military.
    • Available in variety of standard and custom colors.
    • Excellent aesthetic appearance

    Chimney Paint Various Applications:
    • Chimney
    • DG Set
    • Under insulation installations
    • Stack
    • Furnace
    • Burner
    • Boiler
    • Oven
    • Exhaust
    • klin
    • Silencer


    Additional Information:

    • Item Code: HTC-06
    • Production Capacity: 15 Tons Per Day
    • Delivery Time: 5 days
    Get Best QuoteRequest A Callback
    Reinforced Acrylic Water Proofing - MonoProof EW200

    Reinforced Acrylic Water Proofing - MonoProof EW200

    Get Latest Price

    Product Brochure

    Product Details:
    BrandPerma Chemicals
    Usage/ApplicationExterior Walls
    Packaging Size20 Kg
    Coverage2 Coats
    TypeAcrylic
    FormLiquid
    Country of OriginMade in India
    Reinforced Acrylic Water Proofing is 3 coat heat reflection system based on Micro-fibers reinforced Acrylic Water Proofing to200% elongation

    Additional Information:

    • Delivery Time: Immediate
    Get Best QuoteRequest A Callback
    MonoGuard MCI

    MonoGuard MCI

    Get Latest Price

    Product Details:
    MaterialMonoGuard MCI
    Usage/ApplicationIndustrial Use
    Packaging Size5 kg
    BrandMonoGuard
    Country of OriginMade in India
    Coverage"20 M2 / 5KG / coat * Depend on the Substrate"
    consumption"0.25. m2 / coat * Depend on the Substrate"
    Anti-corrosion coating allows for added protection of metal surfaces and act as a barrier to inhibit the contact between chemical compounds or corrosive materials.

    Additional Information:

    • Item Code: RRS23
    • Production Capacity: 15 Tons Per Day
    • Delivery Time: 5 days
    Get Best QuoteRequest A Callback
    MonoGuard MEC Epoxy Resin Based Protective Coating

    MonoGuard MEC Epoxy Resin Based Protective Coating

    Get Latest Price

    Product Details:
    BrandMonoGuard
    Usage/ApplicationIndustrial
    Country of OriginMade in India
    size5 kg
    coverage9 Sq.m / 5 Kg / 360 mic / 2 coats
    cosumption0.555 kg / Sq.m / 360 mic / 2 coats
    DescriptionMoisture Compatible / tolerant Epoxy Coatings
    Moisture Compatible / tolerant Epoxy Coatings

    Sandable Polyester Putty

    Concrete is today’s main building material. Modern infrastructure, road and bridge construction would be inconceivable without concrete as would skyscrapers and industrial buildings. Concrete is a versatile building material used especially in civil engineering in combination with steel.

    A unique formulation to prevent corrosion of metals in varied climatic conditions for high end industrial applications. Use of Anti corrosive Coatings adds the value to the product by enhancing its lifespan and also reduces the cost of entire operation. Thus it offers a real 'Technocommercial' benefits to the users.

    Features:
    • Durable in all climatic conditions
    • Antifungal- resistant to fungal attack
    • Excellent adhesion : Bonds well with both steel and concrete substrates
    • Excellent flexibility to withstand higher temperatures

    Application Area’s:
    • Chemical / Petrochemical plants.
    • Refineries, Power stations.
    • Nuclear facilities, Industrial facades
    • Wood and paper industry, Food industry
    • Sea Water Desalination, Fertilizer Factories
    • Waste Incineration,
    • Trace heating, Underground tank, Overhead tank.


    Additional Information:

    • Item Code: SPC04
    • Production Capacity: 15 Tons Per Day
    • Delivery Time: 5 days
    Get Best QuoteRequest A Callback
    MonoGuard UWC

    MonoGuard UWC

    Get Latest Price

    Product Details:
    BrandMonoguard
    Packaging Size1 kg
    Coverage2.2 Sq.m/ kg / 300 mic / 2 Coats
    TypeEpoxy
    Country of OriginMade in India
    DescriptionUnder Water Coating for protection of submerged metallic & nonmetallic substrates
    Under Water Coating for protection of submerged metallic & nonmetallicsubstrates

    Additional Information:

    • Item Code: SPC-21
    • Production Capacity: 15 tons per day
    • Delivery Time: 5 days
    Get Best QuoteRequest A Callback
    Crystallization Based WaterProofing System - Krystal IG

    Crystallization Based WaterProofing System - Krystal IG

    Get Latest Price

    Product Details:
    Usage/ApplicationWaterProofing Injection Grout
    Packaging Size20Kg
    Model Name/NumberKrystal IG
    Weight Kg20 Kg
    Country of OriginMade in India
    Coverage0.300 kg/ injection Point
    Crystallization Based WaterProofing System is a Crystalline Water Stop Injection Grout.

    Additional Information:

    • Item Code: CW06
    • Delivery Time: Immediate
    Get Best QuoteRequest A Callback
    MonoProof-AEW High Performance Acrylic Polymer Modified Elastomeric Waterproofing Coating 20 Kg
    • MonoProof-AEW High Performance Acrylic Polymer Modified Elastomeric Waterproofing Coating 20 Kg
    • MonoProof-AEW High Performance Acrylic Polymer Modified Elastomeric Waterproofing Coating 20 Kg
    • MonoProof-AEW High Performance Acrylic Polymer Modified Elastomeric Waterproofing Coating 20 Kg

    MonoProof-AEW High Performance Acrylic Polymer Modified Elastomeric Waterproofing Coating 20 Kg

    Get Latest Price

    Product Brochure

    Product Details:
    BrandMonoProof
    FormLiquid
    Packaging Size20 Kg
    ColorWhite
    TypesMasonry, Acrylic
    Specific Gravity1.65
    Viscosity12
    Model NumberMonoProof_AEW_11104
    Tensile Strength2.2
    ToxicityNon Toxic
    Compressive Strength16.5
    Elongation At Break45
    pH Value12
    Chemical ResistanceYes
    Mix Ratio1(R)2(A)
    Pot Life45
    Functional Cure24
    Water Absorption0.3
    Water Vapour Permeability1.5
    Hydrostatic PressureHydrostatic Pressure
    Coverage12.5 sq.mtr / 20 kg / 1 mm / 2 coats
    Consumption1.6 kg / sq.mtr / 1mm / 2 Coats
    • Acrylic polymer modified elastomeric waterproofing membrane coating for concrete & masonry surfaces, Concrete Roof / Terrace
    • MonoProof AEW is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion.


    Description:

    MonoProof AEW is a three-layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing system. MonoProof AEW is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and durable water tight coating which cannot be easily damaged or worn away. The coating is designed to re-face and even out variations in concrete and masonry surfaces.This is an easily brush able coating which can simply be applied by a stiff brush, or trowel to obtain the desired thickness. The polymer provides with exceptional adhesion, toughness and durability. MonoProof AEW effectively seals concrete masonry walls and bridges the shrinkage cracks which are static.The coating additionally protects against concrete decay providing a long lasting barrier to waterborne corrosive salts, freeze-thaw scaling, chloride, carbonation and atmospheric gases. A 1mm coating provides anti carbonation cover equivalent to over 80cm of concrete or air layer thickness for carbon dioxide diffusion (R) of 92 metres. MonoProof AEW is shown to resist positive hydrostatic pressure up to 7 meter head MonoProofAEW is suitable for all types of structures including those in coastal environments.

    Product Features:

    • Minimum surface preparation needed - Low labor costs.
    • Applied directly to the damp concrete and masonry
    • Excellent adhesion - Bonds to porous and nonporous surfaces.
    • Non-toxic-ideal for potable water tanks
    • Waterproof - Excellent for damp-proofing basements
    • Breathable-allows transmission of water vapor from interior of building.
    • Excellent for concrete roof, leaking brick and masonry walls
    • Good resistance to Carbon dioxide and Chloride ion diffusion
    • Flexible enough to bridge hairline crack bridge up to 0.5mm width
    • Water vapor permeable
    • Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
    • Ease of application – can be applied by brush & roller easily.
    • Light weight – does not add extra weight over the

    Application Area:
    • Basement
    • water tanks
    • reservoirs
    • swimming pools
    • Flat roofs
    • terraces and balconies
    • Bridge As
    • Lift Pits
    • Concrete foundations
    • Parking decks
    • Bathrooms, Toilets, Sunken Portions
    • Podiums
    • Roof Gardens
    • Retaining walls
    • Pile heads
    • Submerged tunnels
    • Sumps
    • Structural surface of cellars
    • Canals and dam walls
    • Sea Water Channels
    • Steam rooms
    • Sewerage Treatment Plants
    • Drainage culverts


    Additional Information:

    • Item Code: MonoProof_AEW_11104
    • Production Capacity: 15 Tons Per Day
    Get Best QuoteRequest A Callback
    MonoProof PWP2K Solvent Free Two Component  Polyurethane Elastomeric Waterproofing Coatings

    MonoProof PWP2K Solvent Free Two Component Polyurethane Elastomeric Waterproofing Coatings

    Get Latest Price

    Product Details:
    Minimum Order Quantity5 Kg
    BrandMonoProof PWP2K
    Packaging Size5 kg
    FormLiquid
    Packaging TypeBucket
    Model Name/NumberWP15
    Country of OriginMade in India
    consumption0.28 Kg / Sq.mtr / coat
    coverage18 Sq.m / 5 Kg / 0.2mm / Coat
    We are offering Varoius kinds of Two Component Polyurethane based Waterproofing Coatings, Coatings and Water Proofing Services. Wide range of permanent waterproofing systems.

    MonoProof PWP two component, aliphatic, thixotropic, non-yellowing, non-chalking, pigmented polyurethane based elastomeric waterproof coating possessing good resistance to long termexposure of UV rays and provides an easily cleaned coating.

    Areas of application:

    • Cement- concrete water storage tanks.
    • Damp walls (Interior / Exterior)
    • As a primer before painting (Interior/Exterior)
    • Coating on walls of Breweries & Food processing industries.
    • As a primer before application of coating in Food & Drug industries.
    • Hatcheries & Aqua farms


    Additional Information:

    • Item Code: WP-15
    • Production Capacity: 15 Tons Per Day
    • Delivery Time: 5 days
    Get Best QuoteRequest A Callback
    Rubber Part Repair Putty

    Rubber Part Repair Putty

    Get Latest Price

    Product Details:
    Packaging Size500 gms
    Size500 gms
    BrandSavesPast FP
    Coverage157.48 Sq.inch / 500 gms / 2.5 mm
    Consumption0.0032 kg / Sq.inch / 2.5 mm
    This high performance two-part urethane was developed to repair critical operating equipment faster, more reliably and with greater ease than before. Rubber Repair Putty is an adhesive, sealant and repair compound all in one convenient, self-mixing system. Extremely tough and fast curing, it forms permanent bonds to rubber, urethane, PVC, metal, glass, masonry and plastics. Its excellent flexibility and elongation properties make it suitable as a sealant in the most demanding environments. And, the system's no-measure, self-mixing features make it extremely convenient for fast, on-site repairs, especially to conveyor belts and other rubber parts exposed to weather and extreme wear.

    Recommended Applications of Rubber Part Repair Putty

    • Repairing conveyor belts.
    • Repairing or rebuilding rubber liners in mills, pumps, feeder bowls, hoppers, chutes, and fans.
    • Repairing cast urethane screens and liners.
    • Forming tough, flexible bonds to metal, rubber, and masonry parts
    Get Best QuoteRequest A Callback

    EXPLORE MORE CATEGORIES

    Contact Us
     
    Thank youYour Enquiry has been sent successfully.
    © Monarch Industrial Products India Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.